Logo

Loading your experience...

Namakwala
Namakwala
Garnet Filter Media Supplier Nigeria

Garnet Filter Media Supplier Nigeria

Garnet Filter Media Supplier Nigeria Water Treatment


Garnet Filter Media Supplier Nigeria Water Treatment

Across Nigeria, a lot of treated water starts as borehole water. Estates, factories, hotels and packaged-water plants run it through filters before it is used or sold, and the filter vessels are only as good as the media inside them. The media is also one of the quietest purchases in a treatment plant: it isn’t needed often, it isn’t needed in large amounts, and it is needed on time when the day comes.

This page is for buyers who are ready to source: water-treatment contractors, filter builders, plant operators and distributors in Nigeria. It explains how garnet works inside a multimedia filter, how to size a layer, how to plan change-outs and how to order a small quantity without paying more than you should in freight. Namakwala is a third-generation Indian mineral and salt exporter, and its garnet abrasive is listed for filtration media among its applications.

What Garnet Does in a Filter

A multimedia filter uses layers of different materials so that water passes through coarser, lighter media first and finer, denser media last. Garnet is commonly used as the bottom layer, beneath sand and anthracite:

  • It is dense. Namakwala garnet has a specific gravity of 4.0 to 4.2 g/cm³, much higher than sand, so after each backwash the layers resettle with garnet at the bottom.
  • It is hard. Its Mohs hardness is 7.5 to 8, so it resists wearing down through repeated backwashing.

Your filter designer or equipment maker sets the layers, grain sizes and depths. This page can’t replace that design, and we’d ask you to share it with us before we suggest a grade.

Who Buys Garnet Filter Media

Buyer = What they usually need

Water-treatment contractors = Media that matches the design, on site when the vessels are ready

Filter builders and fabricators = Consistent grain size and repeat supply

Plant operators (estates, factories, hotels, packaged-water producers) = Top-up and replacement media on a planned schedule

Distributors = A dependable source and several grades

What to Check on a Media Specification

What to check = Why it matters = Namakwala data

Specific gravity = Decides where the media settles after backwash = 4.0 – 4.2 g/cm³

Bulk density = Converts layer volume into weight = 2.3 – 2.5 g/cm³

Hardness = Resistance to wear from backwashing = Mohs 7.5 – 8

Grain size and distribution = Controls how the layer filters and settles = Mesh 12/24, 20/40, 30/60, 80, 120, 200 (customizable)

Chloride and conductivity = Indicate a cleaner material with fewer soluble salts = Chloride below 25 ppm; conductivity below 25 µS/cm

Grain consistency = Affects how evenly the layer behaves = Described as consistent grain size

Two items matter for filtration but aren’t on our published sheet: acid solubility and fines content. If your specification sets limits for either, tell us, and we’ll discuss test data per lot. Ask any supplier, including us, for the test report for the lot you’re buying instead of relying on a claim.

Sizing a Layer: A Worked Example

The formula is:

Garnet weight (t) = number of vessels × vessel area (m²) × layer depth (m) × bulk density (t/m³)

Namakwala garnet bulk density is 2.3 to 2.5 g/cm³, which equals 2.3 to 2.5 t/m³. An illustrative plant with three pressure filters of 1.2 m diameter and a garnet layer of 0.10 m:

Step = Calculation = Result

Area per vessel = π × 0.6² = about 1.13 m²

Volume per vessel = 1.13 × 0.10 = about 0.113 m³

Weight per vessel (at 2.4 t/m³) = 0.113 × 2.4 = about 0.27 t

Weight for 3 vessels = 0.27 × 3 = about 0.81 t

With a 5% allowance for handling losses = 0.81 × 1.05 = about 0.85 t

These figures are illustrative only. Use your own vessel dimensions and the layer depth from your designer.

Planning the Change-Out

Garnet doesn’t need replacing often, which is exactly why it gets forgotten. A short plan helps:

  1. Record the media depth at commissioning, and measure it at regular inspections.
  2. Watch performance: rising pressure drop between backwashes, poor filtrate quality or media found in the backwash water are signs to investigate.
  3. Estimate the loss rate from your own history, since it differs by plant and operating conditions. In an illustrative case where 3% of the bed is lost per year, the 0.81 t bed in the example above would need about 25 kg of top-up per year.
  4. Keep a reserve on site, so a top-up doesn’t wait for an overseas shipment.
  5. Plan a full renewal when inspection data says the media has reached the end of its life, and schedule it for a planned shutdown.

Ordering a Small Quantity Economically

Filter media orders are often small, and shipping a small quantity from India costs more per tonne than shipping a large one. Practical ways to keep costs down:

Approach = How it helps

Combine several vessels or several sites into one order = Spreads freight over more tonnes

Combine with a distributor’s order = A distributor can pool demand from several customers

Order a planned year’s requirement instead of repeated small top-ups = Fewer shipments, fewer clearing costs

Time the order with a larger project = Fits the media into a larger consignment

Ask us about minimum quantities and packaging options for your project, and tell us your delivery port (for example in Lagos or Port Harcourt). We don’t want to quote you a price per tonne that ignores what the freight does to a small order.

Drinking-Water and Regulated Uses

If the filtered water will be used for drinking or for packaged water, materials in contact with it may need to meet specific requirements. Please confirm what applies with your compliance adviser and the relevant Nigerian regulator before specifying any media, and tell us the end use so we can discuss which documents and test data you can request. We haven’t claimed any drinking-water approval on this page.

Handling and Safety

Namakwala garnet is described as free from hazardous crystalline silica. Fine dust of any mineral should still be controlled, so use ventilation and suitable protection when loading filters, and ask us for safety documentation when you enquire.

Comparing Quotes

  1. Grade and test data: make sure every quote covers the same mesh and the same data.
  2. Price basis: FOB, CIF or delivered. Add freight, port charges, clearing and inland transport if they aren’t included.
  3. Quantity assumptions: a per-tonne price for a large order can’t be compared with one for a small order.
  4. Packaging: the bag or bulk format, and how it suits your site handling. This is discussed per order.
  5. Lead time from order to arrival, and how reliable it has been.
  6. Documents that come with the shipment.
  7. Consistency: the same grain size lot after lot means fewer surprises at commissioning.

Garnet Abrasive Specifications

Property = Specification

Source = Almandine garnet

Mohs Hardness = 7.5 – 8

Specific Gravity = 4.0 – 4.2 g/cm³

Bulk Density = 2.3 – 2.5 g/cm³

Chloride Content = Less than 25 ppm

Conductivity = Less than 25 µS/cm

Mesh Sizes Available = 12/24, 20/40, 30/60, 80, 120, 200 (customizable)

Note: Specifications can be customized as per industry needs. Final grade is confirmed per order.

Shipping to Nigeria

Namakwala ships from India under export documentation, and packaging is discussed per order. Natural garnet is typically classified under HS 2513, but confirm the code, duties and any Nigerian import requirements with your clearing agent before shipping.

How to Request a Quote

  1. Tell us your application: borehole treatment, industrial process water, packaged water or pool filtration, and whether it’s a new build or a top-up.
  2. Send your media specification: grain size range, layer depth and any limits (acid solubility, fines).
  3. Send your quantity and when you need it on site.
  4. Tell us your delivery port. We’ll reply with a specification, sample options and a quote.

Conclusion

Garnet earns its place in a filter by being dense, hard and consistent, and it earns a place on your purchasing calendar by being easy to forget. Size the layer from the formula, plan the change-out, pool small orders to keep freight down and check the spec and test data before you commit.

Sourcing garnet filter media for a Nigerian water-treatment project? Send us your application, media specification, quantity and delivery port, and Namakwala will reply with a specification, sample options and a quote.

Frequently Asked Questions

Why is garnet used in multimedia filters?

It’s dense and hard, so it settles as the bottom layer after backwashing and resists wear. Your filter designer sets the exact layers and grain sizes.

How do I work out how much garnet I need?

Multiply the number of vessels by the vessel area, the layer depth and the bulk density (2.3 to 2.5 t/m³). The worked example above shows the steps.

Can I order a small quantity?

Yes. Contact Namakwala with your quantity and delivery port, and ask about minimum quantities. Combining orders can reduce the freight cost per tonne.

Is the garnet approved for drinking water?

We haven’t claimed any drinking-water approval. Tell us the end use, and confirm requirements with your compliance adviser and the Nigerian regulator.

Can I get a sample before ordering?

Please contact Namakwala with your requirement, and the team will discuss sample options.

WhatsApp Business